Parts by Type

print This page

End Yokes

Filters: SERIES = 1310,
PART NUMBER SERIES SPLINE COUNT SPLINE DIA. HUB DIA. THRU HOLE C/L TO END STYLE DIFF MODEL NOTES VEHICLE CLASS BRAND
2-4-1921 1310 10 1.178 1.438 2.469 SR No machined hub, but OD is 1.800" LD Spicer
2-4-411 1310 10 1.375 1.719 1.500 2.938 UB LD Spicer
2-4-2371 1310 10 1.375 2.000 2.000 3.438 UB LD Spicer
2-4-6011 1310 10 1.375 2.125 1.375 2.938 UB LD Spicer
2-4-7151 1310 10 1.375 2.125 1.375 2.938 UB LD Spicer
2-4-7181-1 1310 10 1.500 2.125 1.734 3.500 BS LD Spicer
3104-10 1310 10 1.125 1.552 1.500 3.000 BS Dana 44 LD PTI
2-4-2611-1X 1310 10 1.250 1.875 1.500 2.938 BS LD Spicer
2-4-2611X 1310 10 1.250 1.875 1.500 2.938 UB LD Spicer
2-4-2801-1X 1310 10 1.125 1.552 1.500 3.000 BS Slinger 31875 LD Spicer
N2-4-4061X 1310 10 1.125 1.552 1.500 3.000 CV Common TC yoke for early 10 spline applications. Counterbore 0.311", Slinger 330699 LD Neapco
2-4-4021X 1310 10 1.250 1.750 2.000 3.375 CV LD Spicer
N2-4-2791 1310 10 1.125 1.552 1.500 3.000 UB LD Neapco
2-4-1721-1 1310 10 0.982 1.562 1.938 3.656 BS LD Spicer
2-4-3701-1 1310 10 1.188 1.562 1.500 3.000 BS LD Spicer
2-4-2901-1 1310 10 1.250 2.000 1.750 3.281 BS LD Spicer
2-4-7061 1310 10 1.250 2.000 1.750 3.281 UB LD Spicer
2-4-2671-1 1310 10 1.375 1.750 1.500 3.219 BS LD Spicer
2-4-1731-1 1310 10 1.375 2.125 2.000 3.438 BS LD Spicer
N2-4-2671 1310 10 1.375 1.750 1.750 3.220 UB 20 DEGREES JOINT ANGLE LD Neapco
3104-1921 1310 10 1.178 1.438 2.469 SR No machined hub, but OD is 1.800" LD PTI
2-4-3331 1310 13 0.878 2.000 1.567 2.562 SR LD Spicer
2-4-5411 1310 14 1.268 2.000 2.500 3.688 SR .375 Dia.set screw @ 6 OR 12, hub diameter not ground LD Spicer
2-4-1741 1310 14 1.268 2.120 1.500 2.562 SR LD Spicer
2-4-7141-1 1310 14 1.268 2.125 1.953 3.453 BS LD Spicer
2-4-4931 1310 15 1.010 1.594 2.656 3.562 SR LD Spicer
2-4-4921 1310 15 1.010 2.000 1.062 2.312 SR LD Spicer
2-4-8241 1310 15 1.010 2.120 1.470 2.500 SR LD Spicer
3104-17 1310 17 1.310 1.739 1.181 2.595 UB GM 8.2 LD PTI
2-4-6301 1310 18 1.215 2.120 1.500 2.562 SR LD Spicer
2-4-6341 1310 19 1.274 2.000 1.344 2.500 SR LD Spicer
2-4-5781 1310 21 1.375 2.125 1.469 2.562 SR LD Spicer
2-4-5091 1310 21 1.403 1.875 1.562 3.000 CV LD Spicer
2-4-7801-1 1310 21 1.383 2.250 1.650 3.115 BS LD Spicer
3104-01 1310 23 1.031 1.552 1.500 3.000 BS Dana 28 Slinger 41498 LD PTI
3104-231 1310 23 1.260 1.562 1.625 3.062 BS Counterbore at hub end, Same as Dana 2-4-4441-1 LD PTI
N2-4-JK02 1310 24 1.250 1.876 1.500 3.000 UB Used at differential end on 07+ Jeep JK. LD Neapco
3104-242 1310 24 1.250 1.876 1.500 3.000 UB Used at differential end on 07+ Jeep JK. LD PTI
N2-4-JK06 1310 24 1.250 1.850 1.500 3.000 UB Jeep JK Conversion - Pinion Front LD Neapco
3104-25 1310 25 1.085 1.521 1.500 2.875 UB GM 8.2 LD PTI
2-4-7021-1 1310 26 1.146 1.500 1.469 3.000 BS LD Spicer
2-4-6561-1 1310 26 1.146 1.552 1.495 2.995 BS LD Spicer
2-4-4341 1310 26 1.146 1.552 1.500 3.000 CV LD Spicer
2-4-6781-1 1310 26 1.146 1.552 1.500 3.000 BS LD Spicer
2-4-6641-1 1310 26 1.146 1.552 1.500 3.000 BS LD Spicer
2-4-2271-1 1310 26 1.146 1.562 1.500 3.000 BS LD Spicer
2-4-8311-1 1310 26 1.146 1.844 1.370 3.235 BS Proprietary to Chrysler LD Spicer
3104-02 1310 26 1.146 1.844 1.375 2.938 BS Dana 35 LD PTI
3104-03 1310 26 1.146 1.552 1.500 3.000 BS Dana 30, 44, 50 LD PTI
2-4-7291-1X 1310 26 1.146 1.484 1.484 3.000 BS LD Spicer
2-4-7501-1X 1310 26 1.146 1.469 1.484 3.500 BS LD Spicer
2-4-8091X 1310 26 1.146 1.552 1.500 3.000 UB LD Spicer
3104-26CV 1310 26 1.146 1.552 1.500 3.000 CV LD PTI
3104-262CV 1310 26 1.146 1.614 1.500 3.000 CV DODGE/JEEP FRONT TC CV Conversion Yoke, Splines counterbored on bottom, Includes hub sleeve LD PTI
2-4-6411-1X 1310 26 1.146 1.453 1.500 3.000 BS LD Spicer
2-4-8701-1X 1310 26 1.146 1.500 1.465 3.000 BS LD Spicer
2-4-8541-1X 1310 26 1.146 1.500 1.736 3.270 BS LD Spicer
2-4-2461-1X 1310 26 1.146 1.552 1.500 3.000 BS LD Spicer
3104-263 1310 26 1.146 1.500 1.469 3.000 BS Same as Dana 2-4-7021-1 LD PTI
3104-264 1310 26 1.146 1.453 1.469 3.000 BS 0 Midship end yoke used on multiple applications. LD PTI
3104-261CV 1310 26 1.146 1.453 1.500 3.000 CV 0 CV style midship end yoke used to bolt up a open socket style CV head to a center section. LD PTI
3104-266 1310 26 1.146 1.500 1.469 2.875 SR 0 Snap ring style midship end yoke used on Nissan, Ford, Toyota shafts & more. (3153-252, 3153-302) LD PTI
3104-266M 1310 26 1.146 1.450 1.469 2.875 SR 0 Same as 3104-266 but seal surface turned to 1.45" LD PTI
3104-268 1310 26 1.146 1.552 1.500 3.000 UB Dana 30, 44 takes 2-94-58X U-bolt kit, forged LD PTI
3104-267 1310 26 1.146 1.450 1.469 2.875 SR 0 Forged, PTI 26 spline midship stubs LD PTI
3104-05 1310 27 1.188 1.521 1.475 3.185 BS GM 7.25 LD PTI
3104-27 1310 27 1.172 1.688 1.062 2.750 BS Chrysler 7.25, 8.25 LD PTI
3104-76 1310 27 1.188 1.521 1.500 3.175 BS GM 7.6 FNT TRIPLE LIP DESIGN LD AAM
3104-07 1310 28 1.229 1.844 1.375 2.938 BS AMC 20 LD PTI
3104-08 1310 28 1.218 1.812 1.200 3.460 UB Ford 7.5 LD PTI
3104-28 1310 28 1.218 1.812 2.425 4.000 UB Ford 9 Forged / .500" Counterbore LD PTI
3104-28A 1310 28 1.218 1.812 2.155 3.850 UB Ford 9 Billet aluminum, includes u-bolts and spacer (if required) LD PTI
2-4-6161-1 1310 28 1.229 1.844 1.375 2.938 BS LD Spicer
N2-4-FD01X 1310 28 1.235 1.810 2.420 4.030 UB Joint Angle 25 degrees LD Neapco
3104-281 1310 28 1.218 1.812 2.430 4.100 UB Ford 9 takes 2-94-28X u-bolt kit, forged LD PTI
3104-29 1310 29 1.276 1.875 1.500 2.938 BS Dana 60, 70 LD PTI
2-4-3801X 1310 29 1.276 1.875 1.500 2.938 UB LD Spicer
2-4-3781X 1310 29 1.276 1.875 1.500 2.531 UB LD Spicer
2-4-8391-1X 1310 29 1.276 1.875 1.500 2.996 BS LD Spicer
3104-291 1310 29 1.276 1.875 1.500 3.000 UB Dana 44, 60 takes 2-94-58X u-bolt kit, forged LD PTI
3104-09 1310 30 1.328 1.739 1.170 2.850 BS GM 8.875 Requires strap kit 2-70-28X LD PTI
3104-30 1310 30 1.312 1.940 1.150 3.160 UB GM 8.5 LD PTI
3104-301 1310 30 1.328 1.739 1.181 2.598 UB GM 8.5 Vette LD PTI
3104-302 1310 30 1.276 1.732 1.870 3.375 SR N/A infiniti center yoke LD PTI
N2-4-GM01X 1310 30 1.328 1.740 1.190 2.590 UB LD Neapco
N2-4-GM03X 1310 30 1.312 1.940 1.150 3.160 UB LD Neapco
3104-303 1310 30 1.312 1.940 1.375 2.850 UB GM 12 bolt takes 2-94-28X u-bolt kit, forged LD PTI
2-4-4191-1 1310 32 1.401 2.125 2.000 3.438 BS Replaces 2-4-4191 u-bolt style LD Spicer
3104-321CV 1310 32 1.401 1.943 2.000 3.875 CV CV conversion yoke for 07 and up Jeep JK on front or rear output,
Splines counterbored top and bottom,
Includes hub sleeve		 LD PTI
3104-322CV 1310 32 1.401 1.943 2.000 3.875 CV 03-06 Jeep Rubicon with 241 transfer case LD PTI
3104-32CV 1310 32 1.401 1.875 2.000 3.875 CV TC NP 203/205 Same as 2-4-5341, Counterbored 0.30" LD PTI
2-4-5141-1 1310 32 1.401 2.000 2.000 3.438 BS LD Spicer
N2-4-JK01 1310 32 1.401 1.943 2.000 3.443 UB Used at transfer case on 07+ Jeep JK. Front and rear non-CV 1310 yoke.
LD Neapco
N2-4-5341 1310 32 1.401 1.880 2.000 3.880 CV Joint Angle 13 degrees LD Neapco
10016266 1310 32 1.401 1.943 2.000 4.000 CV Dana 44 07-18 Ultimate Dana 44 Front Axle, Converts Transmission Companion Flange to End Yoke LD Spicer
2-4-8061 1310 36 0.878 1.375 1.000 2.562 SR LD Spicer